Bitumen 85/100 Specification
Appearance:
Bitumen 85/100 is a semi-solid at ambient temperature.
Penetration:
When tested for penetration grade, bitumen 85/100 has a penetration value of 85 to 100 tenths of a millimeter.
Softening Point:
The softening point of bitumen 85/100 is 45 to 52 degrees Celsius under normal conditions.
Other Properties:
- Bitumen 85/100 is a black or dark brown material.
- It is a hydrocarbon material that is soluble in carbon disulfide.
- It has a specific gravity of 1.0 to 1.1.
- Bitumen 85/100 is a thermoplastic material that softens at high temperatures and hardens at low temperatures.
Applications:
Bitumen 85/100 is used in a variety of applications, including:
- Road construction
- Roofing
- Waterproofing
- Pipe coating
- Adhesives
- Sealants
Storage and Handling:
- Bitumen 85/100 should be stored in a heated tank at a temperature between 120°C and 160°C.
- It should be applied at a temperature between 160°C and 180°C.
Safety Precautions:
- Bitumen 85/100 is a hot material and can cause burns.
- It is flammable and should be kept away from open flames.
- Adequate ventilation should be provided when working with bitumen.
For more information, please contact our sales department.
requirement for asphalt cement ASTM d946
Analysis | Unit | Limit | Test Method |
---|---|---|---|
Density @ 25°C | kg/m³ | 1010-1050 | ASTM D70 or D3289 |
Penetration @ 25°C | mm/10 | 85-100 | ASTM D5 |
Softening point | 42min | ASTM D36 | |
Ductility @ 25°C | cm | 100 min | ASTM D113 |
Loss on heating | wt% | 0.5 max | ASTM D6 |
Drop in penetration after heating | % | 20 max | ASTM D5 |
Flash point | 230 min | ASTM D92 | |
Solubility in Trichloroethylene | wt% | 99.0 min | ASTM D2042 |
Spot test | Negative | AASHTO T102 | |
Dynamic Viscosity @ 60°C | Pa.S | 100+20 | ASTM D2171 |
Kinematic Viscosity @ 135°C | cSt | 250 min | ASTM D2170 |
Wax Content | % | 2 max | DIN EN 12606-1 |
Retained Penetration after (T.F.O.T), % | % | 47 min | ASTM D5 |
---|---|---|---|
Ductility, (25°C), 5cm/min, cm after TFOT | cm | 75 min | ASTM D113 |
Viscosity @ 60°C | Pa.S | 500 max | ASTM D2171 |